I am using the tube Dani Delish by Freya Langford-Sidebottom that you can buy here.  This tube has a vamp layer and the pin up layer.  She has her own store with great tubes!  The kit I am using is New Years Eve Masquerade Ball 2 by Hania Design that you can get here.  At any time during the process, you can gradient glow and/or drop shadow for effect.  I start with my 700 x 700.  The masks I used were 116LT and 161InsatiableDreams.  These are from Creative Misfit Creations here.  I seem to use some masks over and over because of how they fit.  I used paper 09 with 116LT making it a large size.  Then, I used paper 08 with the insatiable dreams mask.  Element 71 is next.  I place to to site, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged the four layers down together.  Paper 03 is in front of that with the 116LT mask at a smaller size.  Element 66 is in front of that placed how I wanted to face the bottom.  Element 08 is in front of that from the top down.  Element 61 is in front of that.  Element 70 was placed on a side how I wanted, duplicated, mirrored, and merged down.  Element 77 is in front of that placed how you want with more layers as you see fit.  Element 82 is placed where I wanted and duplicated, mirrored, and flipped for four layers that merge down.  Element 44 is placed in about center to show from the sides.  Element 19 is in front of that how I wanted to see it, duplicated, mirrored, and merged down.  Element 21 was placed where you can see it above the crystals and balloons. Element 75 was placed to be seen on the sides, duplicated, mirrored, and merged down.  Element 11 and 12 are next with a turn to be looking kind of like a star.  Element 20 is placed how I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged together all the layers.  Element 55 is next placed to be visible around.  Element 50 was placed how I wanted, duplicated, mirrored, flipped, and merged down.  Element 73 was placed to go with the crystals in front of them as a swirl.  The tube is on, artist copyright, your watermark, any statement you want to make, and a name.  That is the tag!  Hope you enjoy! I have another look below.

This is a tag I made with a kit called Gothic Xmas by Misty Lynn Creations.  You can buy it here.  The tube is a bonus tube from CDO that you have to buy $10 worth of tubes to be able to get!  She is adorable and is made by Anna Marine!  Hope you enjoy.  I might tut later, but this year went fast.

This tag uses a beautiful tube by Alex P. from PFD that you can purchase here.  The kit is from Bibi, and you can get it here.  I always start with 700 x 700, and you can gradient glow and/or drop shadow anytime you want in the creating process, depending on how you like it.  I used papers 1, 2, and 7.  The masks used are Mask12_Kreations and Circle2byTonya-vi.  These masks are at Creative Misfit Creations here.  My last layer is element 60 placed how I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all those down to one, so four in one layer.  Element 51 is next with the same process.  I make them where I can see them.  I check, when I am done to make sure all can be seen.  Element 61 is in front of that with the same process.  Element 59 was done the same way in front of that.  Paper 1 with the first mask is the next layer.  The sizes are different depending on how I want them to be seen.  Element 100 is in front of that with the duplicate/mirror/flip, so there are four where you want them on one page.  Paper 2 is next with the same mask as Paper 1.  They aren't going the same ways because of flipping one.  Element 92 is placed where I wanted it in front of that.  Element 23 is in front of that about in the middle, so I can see it on the sides.  Element 78 is in front of that.  I made it larger.  Element 87 is next, and I made it larger, too.  Element 53 is in front of that placed how I wanted it seen.  Paper 7 is in front of that with the Circle mask.  Element 55 is placed next, and I believe it is rotated 90 degrees to be up and down.  Element 29 is in front of that.  Element 28 is in front of that placed like I wanted.  Element 98 is next sized to how I wanted.  Element 48 is in front of that.  Element 26 is placed on one side how I wanted, duplicated, mirrored, and merged down.  Element 25 is in front of that.  Element 40 is in front of that placed to be seen. Element 30 is in front of that placed to come down from the cloud like formation I will tell you about later.  Element 95 was placed on a side to fit, duplicated, mirrored, and merged down.  Element 24 was placed with element 99 and 36 to form the cloud looking formation.  Once I had them how I wanted, I merged them down, so they stayed together.  Element 58 was placed to be seen in front of that.  Element 38 was placed on a side how I wanted, duplicated, mirrored, and merged down.  Element 41 was done the same way.  Element 37 was sized as appropriate for a corner, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and all layers merged down, so to have four of them the way I wanted.  From there, I placed my tube, artist copyright, my watermark, my statement of choice, and a name to finish the tag off.  I hope you enjoy! I have more than this one, but it is the one I chose to show here.  My group in new.myboomersplace.com will see the rest.  The group is called Grade A Smartasses, so you can join to ask for tags if you would like.  Hugz~~ Karee

I am using the beautiful tube from the September emag of Pinup Fantasies that you can get here.  There more tubes in the mag.  Plus, you can add their Facebook page to learn more about the issues as they go here. The kit I used was called Dread 107.  I bought it here, and it is by Digicats (and Dogs).  Ok, I started with my usual 700 x 700 image.  Gradient glow and/or drop shadow whenever you want to.  I am at a loss right now cause my pick option isn't working, so I have to resize everything, instead.  Hope it is easier for you.  I used papers 3, 8, and 13.  The masks I used were hsqm0y, AP_SparkleMask1, and BreezeGrungeMask1.  I am thinking I got these from Creative Misfits Creations here.  Below, is the first mask in case you can't find it.  My bottom two levels are paper 3 with the hsqm0y tag.  One of them is as it is, and the other is flipped.  Frame 04 is the next layer sized to your liking.  Frame 07 is next I put one to be seen on one side, duplicated, mirrored, and merged down.  You might save it to do later, but the Spider Web is next, and it is sized to fit like it is in the Frame 02.  I duplicated, mirrored, flipped, and merged down.  Paper 8 is next with the Breeze mask.  Get it to look how you want cause my sizing changed it some.  Frame 02 with the promoted selection from the tube with the gore are the next layers.  In front of that, paper 13 with the AP mask.  Place it how you want your tube to be seen.  Fog element is the next layer, but I colored it how I wanted it.  The rusted chain is next put the way you want it.  I duplicated, mirrored, and merged down.  The lightening element is next, and I put it to look like it was coming from the moon. The fireball element I put where I wanted, duplicated it, mirrored, and merged down.  In front of it, I put the moon, so it looked like it was coming from it.  The spooky eyes I place where I wanted.  From there, I put my tube, my copyright, my watermark, my statement, and a name.  I hope you enjoy the tutorial!  I had fun playing with it.  I have another pic I made from the same background below with a different tube from her.  Hugz~~Karee

I am using the fantastic art of Freya Langford-Sidebottom.  Her art can be seen here.  It is wonderful!  This tube, you can get at artistically inclined licensing here.  The FTU kit is from Wicked Princess Scraps here.  The song I used can be heard/read because it is a lyric video  here at that link.  Reminder that you can gradient glow/drop shadow in this, whenever you would like.  I start with my 700 x 700 image.  I used papers 3, 14, and 15.  Masks used are 099LT, 199InsatiableDreams, and 14v0509.  I think you can get them at Creative Misfits Creations here.  Paper 14 is using the first mask and is the last layer.  Element wire1 is the next layer.  I put it where I wanted it seen, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all of them down.  Skull3 is the next layer with the vines being seen where you want, and you do the same process.  Glitter1 is the next layer with the same process as the first two.  Paper 3 is next with the 14v0509 mask inverted transparency.  Bottlecap2 is the next layer.  I made it as big as I wanted and used eye candy 5 bevel.  Frame2 is the next layer sized how you like it.  Stars3 is the next layer from top to bottom.  BeadedCircles is the next layer with size how I wanted.  Paper 15 is next with the remaining mask.  Chain element is next across top and bottom.  Star4 is next sized and placed where I wanted, and I think I used bevel on it, too.  From there, it is copyright, watermark, statement, name, and you have your tag!  Hope you enjoy!  Karee

Ok, I am using the beach bunny tube from the emag from June 2014 Issue 08.  You get get it here.  I used the kit Tropicos Caliente from PinkParadox Productions.  You can get it here.  It is my ode to summer ending.  I began with my image of 700 x 700.  You can gradient glow and/or drop shadow to your liking at any time in this process.  I used papers 22, 24, 27, 28, and 29.  I used masks AP_SparkleMask2, b, and chas22mask.  I am thinking you can get them all at Creative Misfits Creations here.  The last layer is paper 24 with mask b.  Next, I put element 97 the way I wanted to see it, duplicated, flipped, and merged together.  Papers 22, 28, and 29 are all in front of that sized how you want with the AP mask.  Element 79 was put how I wanted and sized how I wanted, duplicated,flipped,  moved to where I wanted, and merged down.  Frame 1 is in front of it.  Might want to put is sized how you like to get element 79 right.  Element 76 was colored how I wanted and placed where I wanted in front of the frame.  Element 142 was placed where I wanted, duplicated, mirrored, and merged down.  Element 144 was put in front of that how I wanted.  Paper 27 is in front of that with the chas mask in a size you like.  Element 143 was placed and sized how I wanted, duplicated, flipped, and merged down.  Element 93 was placed on the side at size and place I wanted, duplicated, mirrored, and merged down.  From there, you can place your tube, the copyright, your watermark, a statement, and a name.  Hope you enjoy it!  It is very different for me, but I like new things.

Ok, I am using Freya's tube Raven that you can find here.  The kit I used was A Lil Goth by Mellie Beans at PFD that you can get here.  I started with my 700 x 700 image.  The papers I used are 01, 07, and 12.  Masks were 562, 400x450msk015LT, and 260c3ld-vi.  I am thinking I got them from Creative Misfits Creations long ago.  They have their page here.  During this process, you can gradient glow and/or drop shadow at any time.  All right, I paper 07 as the last layer with 562.  Next, I put element 09 where I wanted it seen, duplicated, flipped, and merged down.  Element 02 is in front of it the way I wanted to see it.  Plus, I duplicated, flipped, moved where I wanted, and merged down.  Element 04 is next.  I placed it to be seen, duplicated, rotated 90 degrees, and merged down.  Paper 01 is next with the 260 mask.  Element 01 is next where I can see the edges of it.  Element 13 is next.  I moved it around to see how I wanted it seen.  Element 14 is next.  Sized how I wanted to leave things seen and have it stand out.  Element 50 is the last element that is placed where I wanted.  Paper 12 is the last layer before the tube with the remaining mask.  From there, you add your artist copyright, your watermark, a statement, and a name!  Hope you enjoy cause I had fun creating her!  You can always reach me at the email.  Thanks, Karee

This is original and was made by me.  I used both Harmageddon and Harmageddon-Zombified on this tag.  You can purchase them here and here.  The kit is Zombified by Kristin aka Toxic Desirez.  You can get it here.  Ok, start with you image of 700 x 700.  I used papers 1, 2, and 9.  You can gradient glow and/or drop shadow at any time in this. The masks I used were Circle4_byCora, cg_mask0079105, and b.  I believe you can get them all at Creative Misfits Creations here.  The bottom layer is paper 9 with the b mask.  Next, I have paper 2 with the cg mask.  The razor blade element is in front of that.  I placed it in a corner sideways like I wanted it, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all those down to one layer.  The butterfly element is in front of that.  I put it how I wanted it seen and did the same process to make four of them in a merged layer.  The logo element is in front of it with the same process of making them all one layer, and you see them where you want.  In front of that, is paper 1 with the circle mask.  Then, I put the splatter element on, duplicated, flipped, and merged the layer down. The sparkles were put on, placed how I liked, duplicated, flipped, and merged down.  At this point, you should put frame 1 on where you like.  Put the web element behind it to fit.  I used the magic wand in the frame to put the close up in it, and I moved it behind the frame.  I added the flame element, and I put it on a side to my liking.  I beveled it with alien eye candy5, mirrored, and merged down.  The barbed wire element was put on and placed where I want.  I believe it is beveled, too.  From there, I put the other tube on, the artist copyright, my watermark, my statement, and a name.  Can reach me at the email.  Happy tagging!  Karee

I am using Freya Langford-Sidebottom's tube Lorelei.  You can get here.  The kit is Pink Paradox Productions called Lil Goth Girl.  You can get it here.  I start with my 700 x 700.  The papers I used were 1, 17, 18, and 29.  Not in that order.  I used the mask edge ripples and dmsk0387. I would tell you where to get them, but I, honestly, don't know.  They are early ones, and I thought dmsk had a site, but I couldn't find anything.  I used the edge ripples on both purple papers and the dmsk on the black ones.  Ok, the black papers and 29 are at the back.  All of your elements can be gradient glowed and/or drop shadowed to your liking.  In front of that, element 67 is placed to see what you want.  Element 77 is in front of that.  I put it towards the bottom where I could see some of it, duplicated, mirrored, and merged down. Element 69 in front of that where you want it to be seen.  Element 47 was put on, duplicated, mirrored, and merged down to see parts of it  Frame 8 is in front of that wherever you want it to be seen.  Element 161 is in front of that where you want to see it.  Element 76 is in front of that to create a lighter background behind the front paper.  Element 118 is in front of it.  I placed it where I wanted to see it, duplicated, flipped to liking, and merged down.  Element 81 is in front of it.  I placed it sideways to liking, duplicated, mirrored to liking, and merged down.  Element 82 is in front of that with doing the same process.  Element 169 is in front of that the way you want to see it.  Element 163 I colored to my liking and placed it in front of that where you can see it.  Element 164 is in front of that. I put one on a side where I liked it, duplicated, mirrored to liking, and merged down.  Element 159 is in front of that.  I put it towards the bottom where I wanted it   Paper 1 is in front of that.  Element 165 is in front of it to how you want it.  Element 168 and 162 are in front of that, but you might place frame 13 in front first to size them to fit it.  Element 113 was turned sideways and placed where I wanted on the side, duplicated, mirrored, and merged down.  Element 110 is put where I want is on a side, duplicated, mirrored to liking, and merged down.  Element 122 was put in a corner where I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all those down to one layer.  Element 70 I beveled with alien skin eye candy 5.  I placed it in a corner how I wanted, duplicated, mirrored, flipped, moved how I wanted, and merged down.  Element 68 was placed in the middle and beveled, too.  From there, I put artist copyright, my watermark, add my statement, and any name.  I hope you enjoy.  I have asked for others to show me their work, but no one likes to show anything, I guess.  I had fun, so I hope you do.  Hugz~~  Karee

I used the wonderful kit Darkness by SS Dran Design.  You can get it here.  The tube I am using is Crazy by Arthur Crowe that you can get here.  I start with a 700 x 700.  The papers I used were 3, 5, and 6.  I used masks SwedeMask1, ta8, and TBT_CircleMask2.  I find masks at Creative Misfit Creations here.  The last two layers are papers.  Element 14 is put in front of it.  During this time, you can gradient glow and/or drop shadow at anytime on whatever you want.  Element 21 is in front of that where I wanted it.  Element 25 is in front of that as big as I could get it, and where it would show.  The last paper is in front of that.  Element 43 was put in front of that where I wanted it to be seen.  Element 28 is in front of that.  Obviously, I have more than one where I wanted them. Element 3 was put in front of it where I wanted it, and element 38 was placed in front of it as if the moon was on fire.  From there, I put the artist's copyright, my watermark, and a name on it to finish it off.  Below, I have tags I made with Di_Halim from S&CO, Simon Han from MPT, and Michael Landefeld from CDO.

 These are tags I made using the wonderful kit by Bibi's Collection USA Love that you can get here.  Both tubes are by Keith Garvey, and you can purchase them here and here.  A happy 4th of July to all, and I will have more up, soon!

I made this tag with the wonderful kit Lolas by Bibi that you can get here at S&Co.  The tube I am using is the cute tube Steampunk Babe that you can get here a the PSP Project sight.  I start with the 700 x 700 image, so let's get to the tutorial.  I used papers 5, 9, 8, and 12, and I used masks Becky_Mask022, Becky_Mask033 and Breezemisfitschoicemask3.  I get these at Creative Misfits Creations here.  The last layer is paper 9 with paper 5 in front of it.  The masks used for them are the Becky ones.  Anywhere and/or on anything you can gradient glow and/or drop shadow for effect.  In front of them, I put element 79 where I wanted it in a corner to be seen, duplicated, flipped, duplicated, mirrored, duplicated, and flipped, so I had four.  One for each corner, and I merged those layers down.  I put element 111 in front of that where I wanted to see it.  I duplicated it, and I merged the layers down.  Element 69 is in front of that.  I put one on a side the way I wanted, duplicated, mirrored, and merged down.  Then, I put element 94 to look like it is hooking onto the elements behind it, duplicated, flipped, and merged down.  Element 45 is in front of that put in a way I could see the circle part, duplicated, mirrored, flipped, and merged down.  Element 23 is in front of that in a size where you can see it through the blades and around them a bit.  Element 19 is in front of that with element 20 in front of it.  I put them so the edges were all right, and the openings can match up.  Element 81 is in front of that.  I placed it in a part where I could see some of it duplicated, flipped, duplicated, mirrored, duplicated, mirrored, and merged all of the bubble layers together.  Element 71 is in front of that, but element 11 was placed first because the web has to be put in the circle just right to match edges.  Element 50 is in front of that.  I put is on half of the tag, duplicated, mirrored, flipped, and merged the layers down.  In front of that, there is paper 12 and paper 8 with the Breeze mask.  Each one has different sizes to them to look like they do.  Element 44 is in front of that where you want it.  Element 41 is in front of that wherever you want to put it.  The last element is 7. You can put it where you feel the need.  From there, I put the artist copyright, my watermark, my statement, and a name!  Below, I have some more tags from the kit.  A couple of them have an added element or two.  They use tube from The Hunter, Zlata Ma, and Alex Prihodoko.  Remember that you can reach me by email and show me what you come up with!  No one does, but it is worth asking...

I used the kit by SS Dran Designs of Kick It.  It was in S&CO, but it appears to be gone, now.  I used the beautiful artwork of Verymany from PFD.  You can find it here, at PFD.  Open your image of 700 x 700, so we can begin.  I used papers 1, 3, 5, and 6.  I used masks APdraw13, AR315_CMC_Mask81, and b.  These you can get at Creative Misfits Creations here.  I have many masks from there, so some might be very old.  I used elements 4, 8, 23, 25, 26, 30, and 37.  I am doing a short tutorial for this because of the kit being retired.  Below, I have tags with the work of Verymany, again, and Alex Prihodoko.

I am using the wonderful kit Baby Blue by Bibi's Collection.  You can buy it here at S&Co.  The art work is from Barbara Jensen.  That tube you can get here.  Of course, I did some coloring on it to make it match the background with the hue and saturation.  Let's open a 700 x 700 and get started.  I used papers 5, 1, and 2, and I used masks TBT_CircleMask2, ApCircle4, and AR315_CMC_mask85.  These masks are from Creative Misfits Creations here.  My last layer is paper 5 with the last mask on it.  The next layer is paper 1 with the first mask on it.  Element 5 was put in front of that big enough to see in certain parts.  Make sure you gradient glow and/or drop shadow whenever and wherever you want.  Element 16 is in front of that.  I made it big to cover the top the way I wanted it to be seen, duplicated, flipped, and merged those layers down.  Element 23 was put in front of that in a corner as I wanted to be able to see part of it.  I duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all four layers down, so I could have four if them where I wanted to see them.  Element 21 is in front of that where I wanted to see it, so it is more in the center.  I put it where I wanted to see it, duplicated, flipped, and merged the layers together to have one on bottom and top.  Element 49 is in front of that placed where I wanted to see it.  I duplicated, flipped, and merged those layers down to have them on top and bottom.  Element 57 is in front of that.  I put it on a side, so I could see if coming out, so I had to rotate it.  From there, I duplicated, mirrored, and merged the layers down.  In front of it, there is paper 2 with the second mask.  Element 71 is in front if that layer.  I placed it how I wanted to see it and just left one layer.  Element 54 is in front of that.  It was put on the side to show what I wanted of it, duplicated, mirrored, and merged down.  Then, I put element 43 in front of that.  I used Eye Candy 5 bevel on it, and I put it not look like a frame, but go with the background.  Element 55 is in front of that.  I put one on a side where I wanted it, duplicated, mirrored, and merged the layers down.  It covers, but allows you to see the frame.  Element 62 is in front of that.  I got it where I wanted, duplicated, flipped, mirrored, and merged them down.  That way it was going the opposite direction.  Element 48 is on there next.  I have two layers of it.  The under one is colored like the tag below, and the regular colors are put on top of that.  Make sure you get them even, if you change the size of them.  Element 35 is in front of that.  I put it how I wanted it, duplicated, flipped, moved the bottom part around how I wanted, and I merged the layers down.  Element 22 is in front of that.  I placed on on the top where I wanted, duplicated, flipped, and merged the layers down.  Element 33 is in front of that. I put one on the side how I wanted, duplicated, mirrored, and merged down.  Element 68 is in front of that.  I used Eye Candy 5 Bevel on it, duplicated, put them where I liked them, and merged the layer down.  Element 2 is in front of that.  I put it where I wanted it, duplicated, mirrored, and merged down.  From there, I put my tube, my copyright, my watermark, and a name.  Below, I have a tag with a Vermany tube and a change in some of the background, and two more with Barbara Jensen tags on them. My email is there for questions and/or any tags you would like to show me.  I would appreciate it!  Hugz~~

I used SS Dran Designs beautiful kit Dark N Sexy!  You can get it at S&Co here.  The tube is the gorgeous work of Celinart that you can get here.  Ok, let's start with your 700x700 new image.  I used papers 1 and 5.  The masks I used were 021LT and 9.  These you can get at Creative Misfits Creations here.  You can gradient glow and/or drop shadow wherever and whenever you want.  My last layer is paper 1 with the first mask.  In front of that, I have element 11.  I put it where I wanted it to be seen, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all of them down.  Element 41 is in front of that.  I did the same as I did with the element before with placing it where I wanted it, and I duplicated it to have four with one in each corner.  Element 7 is in front of that which I made to cover the whole page to be seen.  Element 33 is in front of that.  I put it where I wanted it seen, duplicated, mirrored, and merged the layers down.  Element 37 was put in front of that, but I evened it to make it straight across the top.  I duplicated the layer, but I put element 25 between them.  That way, one is behind the grave stone, and the other is in front of it.  My paper 5 with the other mask is in front of that.  Element 9 is in front of that.  I placed it where I wanted it to be seen, either on top of bottom, so you can duplicate, flip, and merge the layers together to have one on top and one on bottom.  Element 34 is in front of that.  I placed one on a side where I wanted it, duplicated the layer, mirrored, and merged down.  Element 46 is in front of that.  I placed it how I wanted on top, duplicated, flipped, mirrored, and merged down.  That way, I have them on top and bottom going opposite ways.  One of my tubes is in front of that with element 17 in front of it.  I duplicated the tube and erased what I needed to have her hands in front and her foot behind it all.  Element 8 was placed in the upper right corner where I wanted it.  From there, I put copyright, watermark, and name on it to make it a finished product.  Below, I have three more I made to have different looks.  The tubes are from Alex Prihodko, Trinita, and Barbara Jensen.  Hope you enjoy and my email is available for any comments or showing off tags you did from my tutorial!  Hugz~~  Karee

This is my original creation.  I used the kit Lovely Rockdoll by Bibi's Collection that you can find at S&CO here.  The tube is by Barbara Jensen.  You can find it here.  I am using Paint Shop Pro X 2 Ultimate.  Start with your 700x700 new image open, and we begin.  I used papers 3 and 6.  Plus, I used masks MisfitsChoiceMask4 from Creative Misfits Creations here, and weescotlass' WSL_Mask_143 you can get here.  The last layer is the paper 3 with the mask from misfits creations.  Gradient glow and/or drop shadow whenever and wherever you want in the process to make things stand out and/or be darker.  The next layer is element 5 flipped upside down and placed how you want it.  Element 50 is the layer in front of that one.   Element 68 is in front of that layer.  I made them all big to see them on the edges.  Element 37 is in front of that one, and you can put it where you want to be able to see it most through the paper.  Element 83 is in front of that.  I placed one where I wanted it in the left hand corner to show as much as I wanted, duplicated, mirrored, and merged the layer down.  Layer with paper 6 and the WSL mask on it is in front of that.  Element 25 is in front of that where you can see it the most.  Element 87 is in front of that.  I duplicated, mirrored it, and merged down, once I had it where I wanted.  Element 70 is in front of that.  I flipped it upside down, duplicated, mirrored, and merged down.  Element 26 is in front of that.  I flipped it, too, and I played with it to have it placed right with the layer behind and those in front.  Element 85 is in front of that.  I placed it where I wanted it to be seen the best.  Element 65 is in front of that.  I placed one on a side as I wanted to see it, duplicated, mirrored, and merged down.  My word Tragically is the next layer.  In front of that, I have the element 73, so it would meet in the middle.  I had to duplicate, mirror, and merge down to have them together like that.  In front of that, I have element 80 sized to how I like with element 11 sized down to how I wanted, so they looked like one component.  I merged all the layers down together, so they were one component for me to move around.  I did, also, flip element 11, before I put it together with the speaker element.  Element 78 is placed on a side you like duplicated, mirrored, and merged down.  From there, you put whatever tube, a statement of my choice, the artist's copyright, your watermark, and keep the name open to be able to change it.  Below, I have tags I made with the background that have tubes from Verymany, Arthur Crowe, and Alex Prihodko.  Shows the differences you can make with one background.  You can reach me at my email, and enjoy the tut!

I made this, so it is my own and an original creation.  I used the The Undead Beauty kit by SS Dran Designs that you can get at PFD  here, and you can get it at S&Co here.  The tube is Beauty by The Hunter at S&Co here.  Ok, open your image at 700x700, and we can get started.  I used papers 5 and 6.  Masks used were WSL_Mask3 and WSL_Mask6.  You can find them at weescotslass creations here.  She has them in bulk to download.  The paper 5 with Mask 3 is the last layer, so I put element 73 in front of it where I wanted it, duplicated, flipped, and merged down.  This way, I had one on top, and one on the bottom.  Gradient glow and/or drop shadow wherever and whenever you need or like.  Element 68 is next.  I placed one in the middle where I wanted, duplicated, mirrored, and merged them down.  The next layer is paper 6 with mask 6.  Element 1 is in front of that.  I made it huge and put it as a major part of the whole thing.  Element 76 is in front of that.  I placed it how I wanted, duplicated, flipped, and merged down, so I had it on the top and bottom the way I wanted.  Element 25 is next.  It was duplicated and flipped, but the duplication is on another layer.  Element 71 was in front of that.  I used eye candy 5's bevel on it.  I made it so it could go on the bottom like that, duplicated, mirrored, and merged down.  Element 9 is in front of that the place I wanted it to show.  In front of that, I have the duplicated web layer.  The layer in front of that has element 8 on it.  I put one on a side where I wanted it, duplicated, mirrored, and merged down.  From there, I put the tube on, artist's copyright, my watermark, and the name.  I have three below that are using Tony T, Celinart, and Di Halim for the same background with different statements! Enjoy, and you can contact me at my email anytime.  Hugz~~  Karee

I used the great kit Love Sucks by Bibi's Collection that you can get  at S&Co here, and the wonderful tube that goes with it by Di_Halim that you can get at the same store here.  I started with 700 x 700 in PSP X2 Ultimate.  You should have a knowledge of how to use it.  Papers used were 5, 6, and 7.  Masks used were TBT_CircleMask1, TBT_CircleMask2, and ta8.  They are available at Creative Misfits Creations here. In this process, you can gradient glow and/or drop shadow whenever you want.  From the back, papers 6 and 5 with the Circle Masks are back there.  Element 25 is in front of that with a motion trail and inner bevel from eye candy 3.1.  I did it to one, duplicated, mirrored, and merged those layers down.  Element 27 is in front of that to the size you like, so you can see enough of it.  Element 69 was placed in front of that with enough of it seen.  Element 71 is in front of that in a place I wanted, so you can see part of it.  I duplicated, flipped, and mirrored, so it would be on the bottom backwards.  That way you can see it how I wanted.  Paper 7 with ta8 mask is in front of that.  Element 32 is in front of that.  I placed it in the corner, so I could see the edges, duplicated, and mirrored.  That way, one is in each corner.  Element 82 is in front of that placed where I could see it and where I wanted.  Element 83 was placed on the bottom to be seen, duplicated, and flipped to have one on both top and bottom.  Element 53 is in front of that.  I placed it on the side how I wanted, duplicated, mirrored, and flipped it, so they were going the opposite ways.  Choose a frame you want to use, use the magic wand to select it, put whatever layer of the tube you want on it, and promote that layer.  Delete the part that isn't promoted.  Put that image where you want, and I put mine, so the bottom could not be seen.  Element 29 is in front of that. I used eye candy 5 bevel on it and placed it in a corner.  From there, I duplicated, mirrored, and flipped to have one in each corner.  Element 85 was sized how I wanted and placed near the heart element, so it can be seen and read.  From there, I put the tube I wanted, the artist's copyright, my watermark, whatever statement, and a name on it.  Below, I have a couple another tag with the same tube, and one with an Exclusive PFD tube made by Origash.  You can email me about anything.

I did this tag with SS Dran Designs Kit Dangerous that you can get at ScrapsNCompany here or at PFD here.  I used the stupendous tube Doreta by Elias that you can get here.  It is my creation alone and was not copied from anyone else.  Open a 700 x 700.  I used Paint Shop Pro X2 Ultimate, so you have to have a knowledge of Paint Shop.  I used papers 6 and 8 and masks smfgrungemask1 and splatmask02.  My masks are from Creative Misfits Creations here.  The last layer is paper 6 with the first mask, and element 15 is in front of it.  I placed it where I wanted it, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all the layers down, so this left me with four seen where I wanted.  Remember to gradient glow and/or drop shadow wherever you want.  Element 55 is in front of that.  I placed it in the corner where I wanted it to be seen.  From there, I duplicated, mirrored, duplicated, flipped, duplicated, mirrored, again, and merged all the layers down, so I have one showing in all four corners all together.  Element 9 is in front of that made to the size I wanted for parts of it to be seen.  The other paper and mask are in front of that.  Elements 6 and 7 are in front of that.  I placed each where I wanted and moved them to be seen how I wanted, duplicated, and moved the other layer where I wanted with all the layers of the gems merged together.  Element 5 is in front of that, and I placed only part of it to be seen, duplicated, and mirrored.  It leaves one on each side.  Element 17 is in front of that made to the size and placed where you want.  Element 16 is placed on a side in front of that, duplicated, and mirrored, so one is on each side.  Element 11 was placed in front of that how I wanted, duplicated, and flipped, so I could have it where I wanted it.  Element 49 was placed in front of that.  I used the Eye candy 5 effect of Bevel on it, and I placed it above all of the stuff, but down far enough to see some of the stuff behind.  Next, you put your tube, the artist copyright, your watermark, and a name on it.  Hope you enjoyed it!  You can always contact me for anything at my email.  Below, I did more tubes with Arthur Crowe and Alex Prihodko.  I used some more elements and added some promoted layers in the handcuffs.

This is my creation.  I am using the wonderful kit Last Night by Bibi's Collection that you can get here. I started with a 700 x 700 and am working with PSP X2 Ultimate.  I used papers 6, 4, and 11 from the back.  I used masks RBsummermask4, MisfitsChoiceMask 4, and MythMask31 from the back.  These masks are from Creative Misfits Creations here.  At any time, you can gradient glow and/or drop shadow in the process.  Element 27 was placed in a corner in front of the last paper to show what I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all the layers down to have all four together.  Next, is the second paper.  Element 73 is in front of that placed to show parts where you want.  Element 72 is in front of that.  I placed it in a corner, duplicated, mirrored, and flipped, so I could have them in opposite corners to show.  Element 33 is in front of that.  I placed it on the side where I wanted it, duplicated, and mirrored to have them on either side.  Element 58 is in front of that.  I placed it in a corner, duplicated, mirrored, and flipped it to have them in two opposite corners.  Element 3 is in front of that.  I placed it where I wanted it, duplicated, and mirrored, so it is like an X on the image and show.  In front of that, I have the last paper.  I put the effect of blinds on it.  You can do it however you want to look.  I put element 64 in front of that to look like I wanted.  Element 34 is in front of that where you want it to look.  Element 31 is placed like a moon in the front of the cloud element and behind element 7, so you can move them how you want them to look.  Next in front of element 7, I put element 5 in a place I wanted, duplicated, and flipped it.  You can place it how you want.  In front of that, I have element 56.  From there, you put the tube you want.  I am using the beautiful tube of Alex Prihodoko you can buy at PFD here.  You need your own watermark, the artist's copyright, and the name you want on it.
Below, I used another Alex tube, an Arthur Crowe tube, and a Barbara Jensen tube on the ones I made with the same background.  One has a couple more elements in it