I made this tag with the wonderful kit Lolas by Bibi that you can get here at S&Co.  The tube I am using is the cute tube Steampunk Babe that you can get here a the PSP Project sight.  I start with the 700 x 700 image, so let's get to the tutorial.  I used papers 5, 9, 8, and 12, and I used masks Becky_Mask022, Becky_Mask033 and Breezemisfitschoicemask3.  I get these at Creative Misfits Creations here.  The last layer is paper 9 with paper 5 in front of it.  The masks used for them are the Becky ones.  Anywhere and/or on anything you can gradient glow and/or drop shadow for effect.  In front of them, I put element 79 where I wanted it in a corner to be seen, duplicated, flipped, duplicated, mirrored, duplicated, and flipped, so I had four.  One for each corner, and I merged those layers down.  I put element 111 in front of that where I wanted to see it.  I duplicated it, and I merged the layers down.  Element 69 is in front of that.  I put one on a side the way I wanted, duplicated, mirrored, and merged down.  Then, I put element 94 to look like it is hooking onto the elements behind it, duplicated, flipped, and merged down.  Element 45 is in front of that put in a way I could see the circle part, duplicated, mirrored, flipped, and merged down.  Element 23 is in front of that in a size where you can see it through the blades and around them a bit.  Element 19 is in front of that with element 20 in front of it.  I put them so the edges were all right, and the openings can match up.  Element 81 is in front of that.  I placed it in a part where I could see some of it duplicated, flipped, duplicated, mirrored, duplicated, mirrored, and merged all of the bubble layers together.  Element 71 is in front of that, but element 11 was placed first because the web has to be put in the circle just right to match edges.  Element 50 is in front of that.  I put is on half of the tag, duplicated, mirrored, flipped, and merged the layers down.  In front of that, there is paper 12 and paper 8 with the Breeze mask.  Each one has different sizes to them to look like they do.  Element 44 is in front of that where you want it.  Element 41 is in front of that wherever you want to put it.  The last element is 7. You can put it where you feel the need.  From there, I put the artist copyright, my watermark, my statement, and a name!  Below, I have some more tags from the kit.  A couple of them have an added element or two.  They use tube from The Hunter, Zlata Ma, and Alex Prihodoko.  Remember that you can reach me by email and show me what you come up with!  No one does, but it is worth asking...

I used the kit by SS Dran Designs of Kick It.  It was in S&CO, but it appears to be gone, now.  I used the beautiful artwork of Verymany from PFD.  You can find it here, at PFD.  Open your image of 700 x 700, so we can begin.  I used papers 1, 3, 5, and 6.  I used masks APdraw13, AR315_CMC_Mask81, and b.  These you can get at Creative Misfits Creations here.  I have many masks from there, so some might be very old.  I used elements 4, 8, 23, 25, 26, 30, and 37.  I am doing a short tutorial for this because of the kit being retired.  Below, I have tags with the work of Verymany, again, and Alex Prihodoko.

I am using the wonderful kit Baby Blue by Bibi's Collection.  You can buy it here at S&Co.  The art work is from Barbara Jensen.  That tube you can get here.  Of course, I did some coloring on it to make it match the background with the hue and saturation.  Let's open a 700 x 700 and get started.  I used papers 5, 1, and 2, and I used masks TBT_CircleMask2, ApCircle4, and AR315_CMC_mask85.  These masks are from Creative Misfits Creations here.  My last layer is paper 5 with the last mask on it.  The next layer is paper 1 with the first mask on it.  Element 5 was put in front of that big enough to see in certain parts.  Make sure you gradient glow and/or drop shadow whenever and wherever you want.  Element 16 is in front of that.  I made it big to cover the top the way I wanted it to be seen, duplicated, flipped, and merged those layers down.  Element 23 was put in front of that in a corner as I wanted to be able to see part of it.  I duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all four layers down, so I could have four if them where I wanted to see them.  Element 21 is in front of that where I wanted to see it, so it is more in the center.  I put it where I wanted to see it, duplicated, flipped, and merged the layers together to have one on bottom and top.  Element 49 is in front of that placed where I wanted to see it.  I duplicated, flipped, and merged those layers down to have them on top and bottom.  Element 57 is in front of that.  I put it on a side, so I could see if coming out, so I had to rotate it.  From there, I duplicated, mirrored, and merged the layers down.  In front of it, there is paper 2 with the second mask.  Element 71 is in front if that layer.  I placed it how I wanted to see it and just left one layer.  Element 54 is in front of that.  It was put on the side to show what I wanted of it, duplicated, mirrored, and merged down.  Then, I put element 43 in front of that.  I used Eye Candy 5 bevel on it, and I put it not look like a frame, but go with the background.  Element 55 is in front of that.  I put one on a side where I wanted it, duplicated, mirrored, and merged the layers down.  It covers, but allows you to see the frame.  Element 62 is in front of that.  I got it where I wanted, duplicated, flipped, mirrored, and merged them down.  That way it was going the opposite direction.  Element 48 is on there next.  I have two layers of it.  The under one is colored like the tag below, and the regular colors are put on top of that.  Make sure you get them even, if you change the size of them.  Element 35 is in front of that.  I put it how I wanted it, duplicated, flipped, moved the bottom part around how I wanted, and I merged the layers down.  Element 22 is in front of that.  I placed on on the top where I wanted, duplicated, flipped, and merged the layers down.  Element 33 is in front of that. I put one on the side how I wanted, duplicated, mirrored, and merged down.  Element 68 is in front of that.  I used Eye Candy 5 Bevel on it, duplicated, put them where I liked them, and merged the layer down.  Element 2 is in front of that.  I put it where I wanted it, duplicated, mirrored, and merged down.  From there, I put my tube, my copyright, my watermark, and a name.  Below, I have a tag with a Vermany tube and a change in some of the background, and two more with Barbara Jensen tags on them. My email is there for questions and/or any tags you would like to show me.  I would appreciate it!  Hugz~~

I used SS Dran Designs beautiful kit Dark N Sexy!  You can get it at S&Co here.  The tube is the gorgeous work of Celinart that you can get here.  Ok, let's start with your 700x700 new image.  I used papers 1 and 5.  The masks I used were 021LT and 9.  These you can get at Creative Misfits Creations here.  You can gradient glow and/or drop shadow wherever and whenever you want.  My last layer is paper 1 with the first mask.  In front of that, I have element 11.  I put it where I wanted it to be seen, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all of them down.  Element 41 is in front of that.  I did the same as I did with the element before with placing it where I wanted it, and I duplicated it to have four with one in each corner.  Element 7 is in front of that which I made to cover the whole page to be seen.  Element 33 is in front of that.  I put it where I wanted it seen, duplicated, mirrored, and merged the layers down.  Element 37 was put in front of that, but I evened it to make it straight across the top.  I duplicated the layer, but I put element 25 between them.  That way, one is behind the grave stone, and the other is in front of it.  My paper 5 with the other mask is in front of that.  Element 9 is in front of that.  I placed it where I wanted it to be seen, either on top of bottom, so you can duplicate, flip, and merge the layers together to have one on top and one on bottom.  Element 34 is in front of that.  I placed one on a side where I wanted it, duplicated the layer, mirrored, and merged down.  Element 46 is in front of that.  I placed it how I wanted on top, duplicated, flipped, mirrored, and merged down.  That way, I have them on top and bottom going opposite ways.  One of my tubes is in front of that with element 17 in front of it.  I duplicated the tube and erased what I needed to have her hands in front and her foot behind it all.  Element 8 was placed in the upper right corner where I wanted it.  From there, I put copyright, watermark, and name on it to make it a finished product.  Below, I have three more I made to have different looks.  The tubes are from Alex Prihodko, Trinita, and Barbara Jensen.  Hope you enjoy and my email is available for any comments or showing off tags you did from my tutorial!  Hugz~~  Karee

This is my original creation.  I used the kit Lovely Rockdoll by Bibi's Collection that you can find at S&CO here.  The tube is by Barbara Jensen.  You can find it here.  I am using Paint Shop Pro X 2 Ultimate.  Start with your 700x700 new image open, and we begin.  I used papers 3 and 6.  Plus, I used masks MisfitsChoiceMask4 from Creative Misfits Creations here, and weescotlass' WSL_Mask_143 you can get here.  The last layer is the paper 3 with the mask from misfits creations.  Gradient glow and/or drop shadow whenever and wherever you want in the process to make things stand out and/or be darker.  The next layer is element 5 flipped upside down and placed how you want it.  Element 50 is the layer in front of that one.   Element 68 is in front of that layer.  I made them all big to see them on the edges.  Element 37 is in front of that one, and you can put it where you want to be able to see it most through the paper.  Element 83 is in front of that.  I placed one where I wanted it in the left hand corner to show as much as I wanted, duplicated, mirrored, and merged the layer down.  Layer with paper 6 and the WSL mask on it is in front of that.  Element 25 is in front of that where you can see it the most.  Element 87 is in front of that.  I duplicated, mirrored it, and merged down, once I had it where I wanted.  Element 70 is in front of that.  I flipped it upside down, duplicated, mirrored, and merged down.  Element 26 is in front of that.  I flipped it, too, and I played with it to have it placed right with the layer behind and those in front.  Element 85 is in front of that.  I placed it where I wanted it to be seen the best.  Element 65 is in front of that.  I placed one on a side as I wanted to see it, duplicated, mirrored, and merged down.  My word Tragically is the next layer.  In front of that, I have the element 73, so it would meet in the middle.  I had to duplicate, mirror, and merge down to have them together like that.  In front of that, I have element 80 sized to how I like with element 11 sized down to how I wanted, so they looked like one component.  I merged all the layers down together, so they were one component for me to move around.  I did, also, flip element 11, before I put it together with the speaker element.  Element 78 is placed on a side you like duplicated, mirrored, and merged down.  From there, you put whatever tube, a statement of my choice, the artist's copyright, your watermark, and keep the name open to be able to change it.  Below, I have tags I made with the background that have tubes from Verymany, Arthur Crowe, and Alex Prihodko.  Shows the differences you can make with one background.  You can reach me at my email, and enjoy the tut!

I made this, so it is my own and an original creation.  I used the The Undead Beauty kit by SS Dran Designs that you can get at PFD  here, and you can get it at S&Co here.  The tube is Beauty by The Hunter at S&Co here.  Ok, open your image at 700x700, and we can get started.  I used papers 5 and 6.  Masks used were WSL_Mask3 and WSL_Mask6.  You can find them at weescotslass creations here.  She has them in bulk to download.  The paper 5 with Mask 3 is the last layer, so I put element 73 in front of it where I wanted it, duplicated, flipped, and merged down.  This way, I had one on top, and one on the bottom.  Gradient glow and/or drop shadow wherever and whenever you need or like.  Element 68 is next.  I placed one in the middle where I wanted, duplicated, mirrored, and merged them down.  The next layer is paper 6 with mask 6.  Element 1 is in front of that.  I made it huge and put it as a major part of the whole thing.  Element 76 is in front of that.  I placed it how I wanted, duplicated, flipped, and merged down, so I had it on the top and bottom the way I wanted.  Element 25 is next.  It was duplicated and flipped, but the duplication is on another layer.  Element 71 was in front of that.  I used eye candy 5's bevel on it.  I made it so it could go on the bottom like that, duplicated, mirrored, and merged down.  Element 9 is in front of that the place I wanted it to show.  In front of that, I have the duplicated web layer.  The layer in front of that has element 8 on it.  I put one on a side where I wanted it, duplicated, mirrored, and merged down.  From there, I put the tube on, artist's copyright, my watermark, and the name.  I have three below that are using Tony T, Celinart, and Di Halim for the same background with different statements! Enjoy, and you can contact me at my email anytime.  Hugz~~  Karee

I used the great kit Love Sucks by Bibi's Collection that you can get  at S&Co here, and the wonderful tube that goes with it by Di_Halim that you can get at the same store here.  I started with 700 x 700 in PSP X2 Ultimate.  You should have a knowledge of how to use it.  Papers used were 5, 6, and 7.  Masks used were TBT_CircleMask1, TBT_CircleMask2, and ta8.  They are available at Creative Misfits Creations here. In this process, you can gradient glow and/or drop shadow whenever you want.  From the back, papers 6 and 5 with the Circle Masks are back there.  Element 25 is in front of that with a motion trail and inner bevel from eye candy 3.1.  I did it to one, duplicated, mirrored, and merged those layers down.  Element 27 is in front of that to the size you like, so you can see enough of it.  Element 69 was placed in front of that with enough of it seen.  Element 71 is in front of that in a place I wanted, so you can see part of it.  I duplicated, flipped, and mirrored, so it would be on the bottom backwards.  That way you can see it how I wanted.  Paper 7 with ta8 mask is in front of that.  Element 32 is in front of that.  I placed it in the corner, so I could see the edges, duplicated, and mirrored.  That way, one is in each corner.  Element 82 is in front of that placed where I could see it and where I wanted.  Element 83 was placed on the bottom to be seen, duplicated, and flipped to have one on both top and bottom.  Element 53 is in front of that.  I placed it on the side how I wanted, duplicated, mirrored, and flipped it, so they were going the opposite ways.  Choose a frame you want to use, use the magic wand to select it, put whatever layer of the tube you want on it, and promote that layer.  Delete the part that isn't promoted.  Put that image where you want, and I put mine, so the bottom could not be seen.  Element 29 is in front of that. I used eye candy 5 bevel on it and placed it in a corner.  From there, I duplicated, mirrored, and flipped to have one in each corner.  Element 85 was sized how I wanted and placed near the heart element, so it can be seen and read.  From there, I put the tube I wanted, the artist's copyright, my watermark, whatever statement, and a name on it.  Below, I have a couple another tag with the same tube, and one with an Exclusive PFD tube made by Origash.  You can email me about anything.