I used the wonderful kit Darkness by SS Dran Design.  You can get it here.  The tube I am using is Crazy by Arthur Crowe that you can get here.  I start with a 700 x 700.  The papers I used were 3, 5, and 6.  I used masks SwedeMask1, ta8, and TBT_CircleMask2.  I find masks at Creative Misfit Creations here.  The last two layers are papers.  Element 14 is put in front of it.  During this time, you can gradient glow and/or drop shadow at anytime on whatever you want.  Element 21 is in front of that where I wanted it.  Element 25 is in front of that as big as I could get it, and where it would show.  The last paper is in front of that.  Element 43 was put in front of that where I wanted it to be seen.  Element 28 is in front of that.  Obviously, I have more than one where I wanted them. Element 3 was put in front of it where I wanted it, and element 38 was placed in front of it as if the moon was on fire.  From there, I put the artist's copyright, my watermark, and a name on it to finish it off.  Below, I have tags I made with Di_Halim from S&CO, Simon Han from MPT, and Michael Landefeld from CDO.

This is my original creation.  I used the kit Lovely Rockdoll by Bibi's Collection that you can find at S&CO here.  The tube is by Barbara Jensen.  You can find it here.  I am using Paint Shop Pro X 2 Ultimate.  Start with your 700x700 new image open, and we begin.  I used papers 3 and 6.  Plus, I used masks MisfitsChoiceMask4 from Creative Misfits Creations here, and weescotlass' WSL_Mask_143 you can get here.  The last layer is the paper 3 with the mask from misfits creations.  Gradient glow and/or drop shadow whenever and wherever you want in the process to make things stand out and/or be darker.  The next layer is element 5 flipped upside down and placed how you want it.  Element 50 is the layer in front of that one.   Element 68 is in front of that layer.  I made them all big to see them on the edges.  Element 37 is in front of that one, and you can put it where you want to be able to see it most through the paper.  Element 83 is in front of that.  I placed one where I wanted it in the left hand corner to show as much as I wanted, duplicated, mirrored, and merged the layer down.  Layer with paper 6 and the WSL mask on it is in front of that.  Element 25 is in front of that where you can see it the most.  Element 87 is in front of that.  I duplicated, mirrored it, and merged down, once I had it where I wanted.  Element 70 is in front of that.  I flipped it upside down, duplicated, mirrored, and merged down.  Element 26 is in front of that.  I flipped it, too, and I played with it to have it placed right with the layer behind and those in front.  Element 85 is in front of that.  I placed it where I wanted it to be seen the best.  Element 65 is in front of that.  I placed one on a side as I wanted to see it, duplicated, mirrored, and merged down.  My word Tragically is the next layer.  In front of that, I have the element 73, so it would meet in the middle.  I had to duplicate, mirror, and merge down to have them together like that.  In front of that, I have element 80 sized to how I like with element 11 sized down to how I wanted, so they looked like one component.  I merged all the layers down together, so they were one component for me to move around.  I did, also, flip element 11, before I put it together with the speaker element.  Element 78 is placed on a side you like duplicated, mirrored, and merged down.  From there, you put whatever tube, a statement of my choice, the artist's copyright, your watermark, and keep the name open to be able to change it.  Below, I have tags I made with the background that have tubes from Verymany, Arthur Crowe, and Alex Prihodko.  Shows the differences you can make with one background.  You can reach me at my email, and enjoy the tut!

I did this tag with SS Dran Designs Kit Dangerous that you can get at ScrapsNCompany here or at PFD here.  I used the stupendous tube Doreta by Elias that you can get here.  It is my creation alone and was not copied from anyone else.  Open a 700 x 700.  I used Paint Shop Pro X2 Ultimate, so you have to have a knowledge of Paint Shop.  I used papers 6 and 8 and masks smfgrungemask1 and splatmask02.  My masks are from Creative Misfits Creations here.  The last layer is paper 6 with the first mask, and element 15 is in front of it.  I placed it where I wanted it, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all the layers down, so this left me with four seen where I wanted.  Remember to gradient glow and/or drop shadow wherever you want.  Element 55 is in front of that.  I placed it in the corner where I wanted it to be seen.  From there, I duplicated, mirrored, duplicated, flipped, duplicated, mirrored, again, and merged all the layers down, so I have one showing in all four corners all together.  Element 9 is in front of that made to the size I wanted for parts of it to be seen.  The other paper and mask are in front of that.  Elements 6 and 7 are in front of that.  I placed each where I wanted and moved them to be seen how I wanted, duplicated, and moved the other layer where I wanted with all the layers of the gems merged together.  Element 5 is in front of that, and I placed only part of it to be seen, duplicated, and mirrored.  It leaves one on each side.  Element 17 is in front of that made to the size and placed where you want.  Element 16 is placed on a side in front of that, duplicated, and mirrored, so one is on each side.  Element 11 was placed in front of that how I wanted, duplicated, and flipped, so I could have it where I wanted it.  Element 49 was placed in front of that.  I used the Eye candy 5 effect of Bevel on it, and I placed it above all of the stuff, but down far enough to see some of the stuff behind.  Next, you put your tube, the artist copyright, your watermark, and a name on it.  Hope you enjoyed it!  You can always contact me for anything at my email.  Below, I did more tubes with Arthur Crowe and Alex Prihodko.  I used some more elements and added some promoted layers in the handcuffs.

This is my creation.  I am using the wonderful kit Last Night by Bibi's Collection that you can get here. I started with a 700 x 700 and am working with PSP X2 Ultimate.  I used papers 6, 4, and 11 from the back.  I used masks RBsummermask4, MisfitsChoiceMask 4, and MythMask31 from the back.  These masks are from Creative Misfits Creations here.  At any time, you can gradient glow and/or drop shadow in the process.  Element 27 was placed in a corner in front of the last paper to show what I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all the layers down to have all four together.  Next, is the second paper.  Element 73 is in front of that placed to show parts where you want.  Element 72 is in front of that.  I placed it in a corner, duplicated, mirrored, and flipped, so I could have them in opposite corners to show.  Element 33 is in front of that.  I placed it on the side where I wanted it, duplicated, and mirrored to have them on either side.  Element 58 is in front of that.  I placed it in a corner, duplicated, mirrored, and flipped it to have them in two opposite corners.  Element 3 is in front of that.  I placed it where I wanted it, duplicated, and mirrored, so it is like an X on the image and show.  In front of that, I have the last paper.  I put the effect of blinds on it.  You can do it however you want to look.  I put element 64 in front of that to look like I wanted.  Element 34 is in front of that where you want it to look.  Element 31 is placed like a moon in the front of the cloud element and behind element 7, so you can move them how you want them to look.  Next in front of element 7, I put element 5 in a place I wanted, duplicated, and flipped it.  You can place it how you want.  In front of that, I have element 56.  From there, you put the tube you want.  I am using the beautiful tube of Alex Prihodoko you can buy at PFD here.  You need your own watermark, the artist's copyright, and the name you want on it.
Below, I used another Alex tube, an Arthur Crowe tube, and a Barbara Jensen tube on the ones I made with the same background.  One has a couple more elements in it

This tag was made by Karee on Sunday the 30th of December, and it is original, so any resemblance is coincidence.
I used the art of Arthur Crowe and the Sexy & Rebell Kit they sell here.  You can use your own, but make sure you have a license to use any tube.
I open a new image of 700 by 700.  Yes, I like them big, and I like a statement tag, so mine will have some kind of statement on them.
For the background, I used three different papers and two different masks.  You can gradient glow and/or drop shadow whenever you want.  The papers I used are 3, 4, and 6.  I did put a gradient glow on a couple.
When it comes to elements, I used the Disco ball in the middle.  Again, you can gradient glow and drop shadow on anything on these tags, so I just have fun with it.  I used the Flame.  I turned it sideways to fit, duplicated, and mirrored to get the flame coming from either side.  The Skull & Chains were placed on to fit, duplicated, and flipped to have them on bottom and top.  The Skull Heart was placed in front of the Disco ball to line it up.  I had to mirror it to get it to go that way.  I placed the Skulls & Posts in the front with sizing to the image.  The Sparkles are behind the Skull & Chains.  At this point, the layers go Skull Heart, Disco ball, Flames, Skull & Chains, and Sparkles.  I took the Splatter and put it between the Skull Heart and Disco ball layers.  I sized it to half and duplicated with a mirror and flip, so it could cover both sides.
From there, you put the artist copyright, your watermark, and whatever you want to say with a name on it.  The one below uses the art of Keith Garvey which you can get here.  It just has different wording.

Any questions or tags you want to share can go to my email mizzundaztood1@gmail.com.  Thanks for viewing!

This tag was created by Karee and was done on Paint Shop Pro X2 Ultimate.  The art work is by Arthur Crowe which you can buy here, and you can get the scrap kit HotNSweet there, too.

When it comes to a mask to use, I used several masks with several different papers in the kit to get the look. The papers I used were numbers 1, 2, 3, 4, and 5.

I used element 6 in the left hand corner with a couple gradient glows.  You can drop shadow when you want to.
Element 7 I put hue of 8 and saturation of 0 to make it that color. Used inner bevel, too.  I duplicated it and mirrored, so they could be on both sides.  All through this process, you can gradient glow and drop shadow whenever you want.
Element 10 I put on the top and sized to the picture.  Once in place, I duplicated and flipped it.
Element 12 was copied and pasted with a pick to fit between element 15.  Behind element 15, I put element 30 and used the same hue and saturation as before.
Always apply copyright and license to the pic.
When it comes to wording, you can put whatever you want.  My wording deals with my time away in a hospital and the problems I dealt with.
With the tag below, I just have a few differences in elements and wording.

To share results or ask questions, you can email me at mizzundaztood1@gmail.com