This tag uses a beautiful tube by Alex P. from PFD that you can purchase here.  The kit is from Bibi, and you can get it here.  I always start with 700 x 700, and you can gradient glow and/or drop shadow anytime you want in the creating process, depending on how you like it.  I used papers 1, 2, and 7.  The masks used are Mask12_Kreations and Circle2byTonya-vi.  These masks are at Creative Misfit Creations here.  My last layer is element 60 placed how I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all those down to one, so four in one layer.  Element 51 is next with the same process.  I make them where I can see them.  I check, when I am done to make sure all can be seen.  Element 61 is in front of that with the same process.  Element 59 was done the same way in front of that.  Paper 1 with the first mask is the next layer.  The sizes are different depending on how I want them to be seen.  Element 100 is in front of that with the duplicate/mirror/flip, so there are four where you want them on one page.  Paper 2 is next with the same mask as Paper 1.  They aren't going the same ways because of flipping one.  Element 92 is placed where I wanted it in front of that.  Element 23 is in front of that about in the middle, so I can see it on the sides.  Element 78 is in front of that.  I made it larger.  Element 87 is next, and I made it larger, too.  Element 53 is in front of that placed how I wanted it seen.  Paper 7 is in front of that with the Circle mask.  Element 55 is placed next, and I believe it is rotated 90 degrees to be up and down.  Element 29 is in front of that.  Element 28 is in front of that placed like I wanted.  Element 98 is next sized to how I wanted.  Element 48 is in front of that.  Element 26 is placed on one side how I wanted, duplicated, mirrored, and merged down.  Element 25 is in front of that.  Element 40 is in front of that placed to be seen. Element 30 is in front of that placed to come down from the cloud like formation I will tell you about later.  Element 95 was placed on a side to fit, duplicated, mirrored, and merged down.  Element 24 was placed with element 99 and 36 to form the cloud looking formation.  Once I had them how I wanted, I merged them down, so they stayed together.  Element 58 was placed to be seen in front of that.  Element 38 was placed on a side how I wanted, duplicated, mirrored, and merged down.  Element 41 was done the same way.  Element 37 was sized as appropriate for a corner, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and all layers merged down, so to have four of them the way I wanted.  From there, I placed my tube, artist copyright, my watermark, my statement of choice, and a name to finish the tag off.  I hope you enjoy! I have more than this one, but it is the one I chose to show here.  My group in new.myboomersplace.com will see the rest.  The group is called Grade A Smartasses, so you can join to ask for tags if you would like.  Hugz~~ Karee

I made this tag with the wonderful kit Lolas by Bibi that you can get here at S&Co.  The tube I am using is the cute tube Steampunk Babe that you can get here a the PSP Project sight.  I start with the 700 x 700 image, so let's get to the tutorial.  I used papers 5, 9, 8, and 12, and I used masks Becky_Mask022, Becky_Mask033 and Breezemisfitschoicemask3.  I get these at Creative Misfits Creations here.  The last layer is paper 9 with paper 5 in front of it.  The masks used for them are the Becky ones.  Anywhere and/or on anything you can gradient glow and/or drop shadow for effect.  In front of them, I put element 79 where I wanted it in a corner to be seen, duplicated, flipped, duplicated, mirrored, duplicated, and flipped, so I had four.  One for each corner, and I merged those layers down.  I put element 111 in front of that where I wanted to see it.  I duplicated it, and I merged the layers down.  Element 69 is in front of that.  I put one on a side the way I wanted, duplicated, mirrored, and merged down.  Then, I put element 94 to look like it is hooking onto the elements behind it, duplicated, flipped, and merged down.  Element 45 is in front of that put in a way I could see the circle part, duplicated, mirrored, flipped, and merged down.  Element 23 is in front of that in a size where you can see it through the blades and around them a bit.  Element 19 is in front of that with element 20 in front of it.  I put them so the edges were all right, and the openings can match up.  Element 81 is in front of that.  I placed it in a part where I could see some of it duplicated, flipped, duplicated, mirrored, duplicated, mirrored, and merged all of the bubble layers together.  Element 71 is in front of that, but element 11 was placed first because the web has to be put in the circle just right to match edges.  Element 50 is in front of that.  I put is on half of the tag, duplicated, mirrored, flipped, and merged the layers down.  In front of that, there is paper 12 and paper 8 with the Breeze mask.  Each one has different sizes to them to look like they do.  Element 44 is in front of that where you want it.  Element 41 is in front of that wherever you want to put it.  The last element is 7. You can put it where you feel the need.  From there, I put the artist copyright, my watermark, my statement, and a name!  Below, I have some more tags from the kit.  A couple of them have an added element or two.  They use tube from The Hunter, Zlata Ma, and Alex Prihodoko.  Remember that you can reach me by email and show me what you come up with!  No one does, but it is worth asking...

I used the kit by SS Dran Designs of Kick It.  It was in S&CO, but it appears to be gone, now.  I used the beautiful artwork of Verymany from PFD.  You can find it here, at PFD.  Open your image of 700 x 700, so we can begin.  I used papers 1, 3, 5, and 6.  I used masks APdraw13, AR315_CMC_Mask81, and b.  These you can get at Creative Misfits Creations here.  I have many masks from there, so some might be very old.  I used elements 4, 8, 23, 25, 26, 30, and 37.  I am doing a short tutorial for this because of the kit being retired.  Below, I have tags with the work of Verymany, again, and Alex Prihodoko.

I used SS Dran Designs beautiful kit Dark N Sexy!  You can get it at S&Co here.  The tube is the gorgeous work of Celinart that you can get here.  Ok, let's start with your 700x700 new image.  I used papers 1 and 5.  The masks I used were 021LT and 9.  These you can get at Creative Misfits Creations here.  You can gradient glow and/or drop shadow wherever and whenever you want.  My last layer is paper 1 with the first mask.  In front of that, I have element 11.  I put it where I wanted it to be seen, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all of them down.  Element 41 is in front of that.  I did the same as I did with the element before with placing it where I wanted it, and I duplicated it to have four with one in each corner.  Element 7 is in front of that which I made to cover the whole page to be seen.  Element 33 is in front of that.  I put it where I wanted it seen, duplicated, mirrored, and merged the layers down.  Element 37 was put in front of that, but I evened it to make it straight across the top.  I duplicated the layer, but I put element 25 between them.  That way, one is behind the grave stone, and the other is in front of it.  My paper 5 with the other mask is in front of that.  Element 9 is in front of that.  I placed it where I wanted it to be seen, either on top of bottom, so you can duplicate, flip, and merge the layers together to have one on top and one on bottom.  Element 34 is in front of that.  I placed one on a side where I wanted it, duplicated the layer, mirrored, and merged down.  Element 46 is in front of that.  I placed it how I wanted on top, duplicated, flipped, mirrored, and merged down.  That way, I have them on top and bottom going opposite ways.  One of my tubes is in front of that with element 17 in front of it.  I duplicated the tube and erased what I needed to have her hands in front and her foot behind it all.  Element 8 was placed in the upper right corner where I wanted it.  From there, I put copyright, watermark, and name on it to make it a finished product.  Below, I have three more I made to have different looks.  The tubes are from Alex Prihodko, Trinita, and Barbara Jensen.  Hope you enjoy and my email is available for any comments or showing off tags you did from my tutorial!  Hugz~~  Karee

This is my original creation.  I used the kit Lovely Rockdoll by Bibi's Collection that you can find at S&CO here.  The tube is by Barbara Jensen.  You can find it here.  I am using Paint Shop Pro X 2 Ultimate.  Start with your 700x700 new image open, and we begin.  I used papers 3 and 6.  Plus, I used masks MisfitsChoiceMask4 from Creative Misfits Creations here, and weescotlass' WSL_Mask_143 you can get here.  The last layer is the paper 3 with the mask from misfits creations.  Gradient glow and/or drop shadow whenever and wherever you want in the process to make things stand out and/or be darker.  The next layer is element 5 flipped upside down and placed how you want it.  Element 50 is the layer in front of that one.   Element 68 is in front of that layer.  I made them all big to see them on the edges.  Element 37 is in front of that one, and you can put it where you want to be able to see it most through the paper.  Element 83 is in front of that.  I placed one where I wanted it in the left hand corner to show as much as I wanted, duplicated, mirrored, and merged the layer down.  Layer with paper 6 and the WSL mask on it is in front of that.  Element 25 is in front of that where you can see it the most.  Element 87 is in front of that.  I duplicated, mirrored it, and merged down, once I had it where I wanted.  Element 70 is in front of that.  I flipped it upside down, duplicated, mirrored, and merged down.  Element 26 is in front of that.  I flipped it, too, and I played with it to have it placed right with the layer behind and those in front.  Element 85 is in front of that.  I placed it where I wanted it to be seen the best.  Element 65 is in front of that.  I placed one on a side as I wanted to see it, duplicated, mirrored, and merged down.  My word Tragically is the next layer.  In front of that, I have the element 73, so it would meet in the middle.  I had to duplicate, mirror, and merge down to have them together like that.  In front of that, I have element 80 sized to how I like with element 11 sized down to how I wanted, so they looked like one component.  I merged all the layers down together, so they were one component for me to move around.  I did, also, flip element 11, before I put it together with the speaker element.  Element 78 is placed on a side you like duplicated, mirrored, and merged down.  From there, you put whatever tube, a statement of my choice, the artist's copyright, your watermark, and keep the name open to be able to change it.  Below, I have tags I made with the background that have tubes from Verymany, Arthur Crowe, and Alex Prihodko.  Shows the differences you can make with one background.  You can reach me at my email, and enjoy the tut!

I did this tag with SS Dran Designs Kit Dangerous that you can get at ScrapsNCompany here or at PFD here.  I used the stupendous tube Doreta by Elias that you can get here.  It is my creation alone and was not copied from anyone else.  Open a 700 x 700.  I used Paint Shop Pro X2 Ultimate, so you have to have a knowledge of Paint Shop.  I used papers 6 and 8 and masks smfgrungemask1 and splatmask02.  My masks are from Creative Misfits Creations here.  The last layer is paper 6 with the first mask, and element 15 is in front of it.  I placed it where I wanted it, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all the layers down, so this left me with four seen where I wanted.  Remember to gradient glow and/or drop shadow wherever you want.  Element 55 is in front of that.  I placed it in the corner where I wanted it to be seen.  From there, I duplicated, mirrored, duplicated, flipped, duplicated, mirrored, again, and merged all the layers down, so I have one showing in all four corners all together.  Element 9 is in front of that made to the size I wanted for parts of it to be seen.  The other paper and mask are in front of that.  Elements 6 and 7 are in front of that.  I placed each where I wanted and moved them to be seen how I wanted, duplicated, and moved the other layer where I wanted with all the layers of the gems merged together.  Element 5 is in front of that, and I placed only part of it to be seen, duplicated, and mirrored.  It leaves one on each side.  Element 17 is in front of that made to the size and placed where you want.  Element 16 is placed on a side in front of that, duplicated, and mirrored, so one is on each side.  Element 11 was placed in front of that how I wanted, duplicated, and flipped, so I could have it where I wanted it.  Element 49 was placed in front of that.  I used the Eye candy 5 effect of Bevel on it, and I placed it above all of the stuff, but down far enough to see some of the stuff behind.  Next, you put your tube, the artist copyright, your watermark, and a name on it.  Hope you enjoyed it!  You can always contact me for anything at my email.  Below, I did more tubes with Arthur Crowe and Alex Prihodko.  I used some more elements and added some promoted layers in the handcuffs.

This is my creation.  I am using the wonderful kit Last Night by Bibi's Collection that you can get here. I started with a 700 x 700 and am working with PSP X2 Ultimate.  I used papers 6, 4, and 11 from the back.  I used masks RBsummermask4, MisfitsChoiceMask 4, and MythMask31 from the back.  These masks are from Creative Misfits Creations here.  At any time, you can gradient glow and/or drop shadow in the process.  Element 27 was placed in a corner in front of the last paper to show what I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all the layers down to have all four together.  Next, is the second paper.  Element 73 is in front of that placed to show parts where you want.  Element 72 is in front of that.  I placed it in a corner, duplicated, mirrored, and flipped, so I could have them in opposite corners to show.  Element 33 is in front of that.  I placed it on the side where I wanted it, duplicated, and mirrored to have them on either side.  Element 58 is in front of that.  I placed it in a corner, duplicated, mirrored, and flipped it to have them in two opposite corners.  Element 3 is in front of that.  I placed it where I wanted it, duplicated, and mirrored, so it is like an X on the image and show.  In front of that, I have the last paper.  I put the effect of blinds on it.  You can do it however you want to look.  I put element 64 in front of that to look like I wanted.  Element 34 is in front of that where you want it to look.  Element 31 is placed like a moon in the front of the cloud element and behind element 7, so you can move them how you want them to look.  Next in front of element 7, I put element 5 in a place I wanted, duplicated, and flipped it.  You can place it how you want.  In front of that, I have element 56.  From there, you put the tube you want.  I am using the beautiful tube of Alex Prihodoko you can buy at PFD here.  You need your own watermark, the artist's copyright, and the name you want on it.
Below, I used another Alex tube, an Arthur Crowe tube, and a Barbara Jensen tube on the ones I made with the same background.  One has a couple more elements in it

I am using the scrap kit Midnight Party by Bibi's Collection that you can get at Scraps N Company here.  I am using an exclusive tube from PFD that you can get here.  I started with my 700 x 700 image in Paint Shop Pro X 2 Ultimate.  I used paper 2 out of the papers, and I used masks Nik- static and MythMask 65.  I am thinking the masks came from Creative Misfits Creations here.  With the MythMask, I took three different colors from the kit and put them each in a raster layer with flood fill, and I used that mask.  Each one was moved the way I wanted to show as much of each color.  Element 36 is, actually, the very back layer placed how I wanted to see it.  I know I moved it around to make it a lot bigger.  Remember to gradient glow and drop shadow wherever you want it to look darker and/or stand out.  Element 60 is the next layer, and it is made to be covering the whole layer.  The next layer is the paper with the mask of Nik - Static made how you want it to look.  Element 16 is in front of it, and I put one where I wanted, duplicated it, mirrored it, and I merged the layers down together.  Element 20 is in front of that, and I placed them how I wanted with a duplicate, mirror, flip, and merge of the layers down.  This way the yellow balls are where I wanted them.  Element 64 is in front of that.  I have it facing downward, so you can see the waves coming from the rose more.  Plus, I did put some motion trail and a form of bevel on it..  In front of it, there is the merged layers of colors with the mask of MythMask 65.  Element 79 is in front of that with a placement how you want and added duplicates, flips, and mirrors if wanted.  Element 37 of yellow stars is in front of that the way you want it.  Element 17 is in front of the placed however you want it.  Element 39 of pink bubbles is in front of that.  I put it where I wanted and mirrored it, so they are on both sides and merged together.  Element 27 is in front of it, and I duplicated to put two flipped, merged, and back to back to be seen how I wanted.  Element 29 is in front of that placed on the bottom half of the pic the way I wanted to see it.  It is turned 90 degrees, too.  Element 57 is in front of that, and I duplicated and mirrored, so they could be on each side.  Element 69 is in front of that, and I put it so it covered the sides and the top to be seen.  Element 46 is in front of that, and I duplicated it to have two beside each other to see the stars hanging down.  Element 82 is in front of that, and I made the hue and saturation different to match the colors.  It is placed on the top to show lights across the top.  Element 25 is in front if it, so it can be seen in the fireworks and not cover the lights.  In front of the blue fireworks, I put element 93 of the bigger fireworks.  I duplicated them, mirrored, flipped, and I placed the flipped side how I wanted it next to the regular fireworks, so I could merge the layers together.  Element 33 of the star balloons is in front of that placed where and how I wanted, so I could duplicate and mirror for one on each side.  I placed elements 70 and 71 each in front of a balloon where I wanted, so I could duplicate and mirror.  This way, each is in front of a balloon to show both colors of fireworks.  Lastly, I placed element 51 in the bottom right hand corner for some more celebration look.  The tube is on with my watermark, the copyright for the artist, the statement of Baby, I'm a Firework, and the name of the person who will be owning it.  You can see three more ways to do it below with Ellie and Alex from PFD.  Show me anything you make at my email and/or ask any questions.  I enjoy any feedback and any followers!  Hugz~~  Karee

This is my creation.  I used the awesome art of Barbara Jensen you can get here.  Plus, I used a wonderful scrap kit by Disturbed Scraps at PicsForDesign that you can get here called Sci-fi Girl.  I started with a 700 x 700 new Image.  The papers I used from the front are 4, 12, and 10.  The masks I used were MisfitsChoiceMask 4, MythMask 22, and MythMask 66.  These can be found at Creative Misfits Creations here.  Ok, Element 1 is in front of the last paper 10.  Fit it to the page, and you gradient glow and/or drop shadow where you want in this process.  Element 63 is placed in front of that where you want to be able to see it.  In front of that, element 85 is placed where I wanted, duplicated, and flipped to see it on top and bottom.  I did do some hue and saturation to make the tube and parts of the kit to look different colors.  The second paper is in front of that, so you have element 110 in front of it with it placed where you want on the side, duplicated, and mirrored to the other side.  Element 98 is in front of that placed where you want to show it, duplicated, and flipped to have on top and bottom.  Element 95 is in front of that placed where you want, duplicated, mirrored, and flipped to have them show.  The last paper is in front of that.  Element 43 is in front of that where you want it to show, and element 145 is placed in the upper portion of the tag between the barb wires, duplicate the layer, and flip, so they are on the bottom and top.  This is where you create the cloud looking effect in the middle.  Element 73 is placed where you want to see the parts you want with element 139 in there for some color.  Element 87 is on top of that how you want it.  Element 137 is put to where you can see parts of it, and element 105 is on top of that.  Element 104 is on top of that placed in the corner of your choice, duplicated, mirrored, and flipped to have it on either side.  From there, element 99 is placed in the other corner, duplicated, mirrored, and flipped to have it so it is on either side.  I always merge those layers down.  Element 10 I used Eye Candy 5 Nature Smoke on it.  You can decide how much smoke you want on it.  Element 20 I beveled with Eye Candy 5 Impact and put in the corner.  You can put a copyright, watermark, and whatever statement with a name on it!  Make sure you see the ones below.  A couple have different elements.  I used Anna Liwanag, Alex Prihodko, and Elias!  Hope you enjoy the tutorial, and you can always show me what you did.  Hugz~~

This is a tag I made with the cute girl from Tatyana Haustova.  You can get the tube here. The kit I used is called Holly Jolly Joy by Niqui's Designs here.  I hope you all have a wonderful Thanksgiving, and a Joyful Christmas!  There are three more with one an On Top tag that I did with this kit, but I used Alex Prihodko and Keith Garvey!