This tag uses a beautiful tube by Alex P. from PFD that you can purchase here.  The kit is from Bibi, and you can get it here.  I always start with 700 x 700, and you can gradient glow and/or drop shadow anytime you want in the creating process, depending on how you like it.  I used papers 1, 2, and 7.  The masks used are Mask12_Kreations and Circle2byTonya-vi.  These masks are at Creative Misfit Creations here.  My last layer is element 60 placed how I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all those down to one, so four in one layer.  Element 51 is next with the same process.  I make them where I can see them.  I check, when I am done to make sure all can be seen.  Element 61 is in front of that with the same process.  Element 59 was done the same way in front of that.  Paper 1 with the first mask is the next layer.  The sizes are different depending on how I want them to be seen.  Element 100 is in front of that with the duplicate/mirror/flip, so there are four where you want them on one page.  Paper 2 is next with the same mask as Paper 1.  They aren't going the same ways because of flipping one.  Element 92 is placed where I wanted it in front of that.  Element 23 is in front of that about in the middle, so I can see it on the sides.  Element 78 is in front of that.  I made it larger.  Element 87 is next, and I made it larger, too.  Element 53 is in front of that placed how I wanted it seen.  Paper 7 is in front of that with the Circle mask.  Element 55 is placed next, and I believe it is rotated 90 degrees to be up and down.  Element 29 is in front of that.  Element 28 is in front of that placed like I wanted.  Element 98 is next sized to how I wanted.  Element 48 is in front of that.  Element 26 is placed on one side how I wanted, duplicated, mirrored, and merged down.  Element 25 is in front of that.  Element 40 is in front of that placed to be seen. Element 30 is in front of that placed to come down from the cloud like formation I will tell you about later.  Element 95 was placed on a side to fit, duplicated, mirrored, and merged down.  Element 24 was placed with element 99 and 36 to form the cloud looking formation.  Once I had them how I wanted, I merged them down, so they stayed together.  Element 58 was placed to be seen in front of that.  Element 38 was placed on a side how I wanted, duplicated, mirrored, and merged down.  Element 41 was done the same way.  Element 37 was sized as appropriate for a corner, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and all layers merged down, so to have four of them the way I wanted.  From there, I placed my tube, artist copyright, my watermark, my statement of choice, and a name to finish the tag off.  I hope you enjoy! I have more than this one, but it is the one I chose to show here.  My group in new.myboomersplace.com will see the rest.  The group is called Grade A Smartasses, so you can join to ask for tags if you would like.  Hugz~~ Karee

I used the great kit Love Sucks by Bibi's Collection that you can get  at S&Co here, and the wonderful tube that goes with it by Di_Halim that you can get at the same store here.  I started with 700 x 700 in PSP X2 Ultimate.  You should have a knowledge of how to use it.  Papers used were 5, 6, and 7.  Masks used were TBT_CircleMask1, TBT_CircleMask2, and ta8.  They are available at Creative Misfits Creations here. In this process, you can gradient glow and/or drop shadow whenever you want.  From the back, papers 6 and 5 with the Circle Masks are back there.  Element 25 is in front of that with a motion trail and inner bevel from eye candy 3.1.  I did it to one, duplicated, mirrored, and merged those layers down.  Element 27 is in front of that to the size you like, so you can see enough of it.  Element 69 was placed in front of that with enough of it seen.  Element 71 is in front of that in a place I wanted, so you can see part of it.  I duplicated, flipped, and mirrored, so it would be on the bottom backwards.  That way you can see it how I wanted.  Paper 7 with ta8 mask is in front of that.  Element 32 is in front of that.  I placed it in the corner, so I could see the edges, duplicated, and mirrored.  That way, one is in each corner.  Element 82 is in front of that placed where I could see it and where I wanted.  Element 83 was placed on the bottom to be seen, duplicated, and flipped to have one on both top and bottom.  Element 53 is in front of that.  I placed it on the side how I wanted, duplicated, mirrored, and flipped it, so they were going the opposite ways.  Choose a frame you want to use, use the magic wand to select it, put whatever layer of the tube you want on it, and promote that layer.  Delete the part that isn't promoted.  Put that image where you want, and I put mine, so the bottom could not be seen.  Element 29 is in front of that. I used eye candy 5 bevel on it and placed it in a corner.  From there, I duplicated, mirrored, and flipped to have one in each corner.  Element 85 was sized how I wanted and placed near the heart element, so it can be seen and read.  From there, I put the tube I wanted, the artist's copyright, my watermark, whatever statement, and a name on it.  Below, I have a couple another tag with the same tube, and one with an Exclusive PFD tube made by Origash.  You can email me about anything.

I did this tag with SS Dran Designs Kit Dangerous that you can get at ScrapsNCompany here or at PFD here.  I used the stupendous tube Doreta by Elias that you can get here.  It is my creation alone and was not copied from anyone else.  Open a 700 x 700.  I used Paint Shop Pro X2 Ultimate, so you have to have a knowledge of Paint Shop.  I used papers 6 and 8 and masks smfgrungemask1 and splatmask02.  My masks are from Creative Misfits Creations here.  The last layer is paper 6 with the first mask, and element 15 is in front of it.  I placed it where I wanted it, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all the layers down, so this left me with four seen where I wanted.  Remember to gradient glow and/or drop shadow wherever you want.  Element 55 is in front of that.  I placed it in the corner where I wanted it to be seen.  From there, I duplicated, mirrored, duplicated, flipped, duplicated, mirrored, again, and merged all the layers down, so I have one showing in all four corners all together.  Element 9 is in front of that made to the size I wanted for parts of it to be seen.  The other paper and mask are in front of that.  Elements 6 and 7 are in front of that.  I placed each where I wanted and moved them to be seen how I wanted, duplicated, and moved the other layer where I wanted with all the layers of the gems merged together.  Element 5 is in front of that, and I placed only part of it to be seen, duplicated, and mirrored.  It leaves one on each side.  Element 17 is in front of that made to the size and placed where you want.  Element 16 is placed on a side in front of that, duplicated, and mirrored, so one is on each side.  Element 11 was placed in front of that how I wanted, duplicated, and flipped, so I could have it where I wanted it.  Element 49 was placed in front of that.  I used the Eye candy 5 effect of Bevel on it, and I placed it above all of the stuff, but down far enough to see some of the stuff behind.  Next, you put your tube, the artist copyright, your watermark, and a name on it.  Hope you enjoyed it!  You can always contact me for anything at my email.  Below, I did more tubes with Arthur Crowe and Alex Prihodko.  I used some more elements and added some promoted layers in the handcuffs.

This is my creation.  I am using the wonderful kit Last Night by Bibi's Collection that you can get here. I started with a 700 x 700 and am working with PSP X2 Ultimate.  I used papers 6, 4, and 11 from the back.  I used masks RBsummermask4, MisfitsChoiceMask 4, and MythMask31 from the back.  These masks are from Creative Misfits Creations here.  At any time, you can gradient glow and/or drop shadow in the process.  Element 27 was placed in a corner in front of the last paper to show what I wanted, duplicated, mirrored, duplicated, flipped, duplicated, mirrored, and merged all the layers down to have all four together.  Next, is the second paper.  Element 73 is in front of that placed to show parts where you want.  Element 72 is in front of that.  I placed it in a corner, duplicated, mirrored, and flipped, so I could have them in opposite corners to show.  Element 33 is in front of that.  I placed it on the side where I wanted it, duplicated, and mirrored to have them on either side.  Element 58 is in front of that.  I placed it in a corner, duplicated, mirrored, and flipped it to have them in two opposite corners.  Element 3 is in front of that.  I placed it where I wanted it, duplicated, and mirrored, so it is like an X on the image and show.  In front of that, I have the last paper.  I put the effect of blinds on it.  You can do it however you want to look.  I put element 64 in front of that to look like I wanted.  Element 34 is in front of that where you want it to look.  Element 31 is placed like a moon in the front of the cloud element and behind element 7, so you can move them how you want them to look.  Next in front of element 7, I put element 5 in a place I wanted, duplicated, and flipped it.  You can place it how you want.  In front of that, I have element 56.  From there, you put the tube you want.  I am using the beautiful tube of Alex Prihodoko you can buy at PFD here.  You need your own watermark, the artist's copyright, and the name you want on it.
Below, I used another Alex tube, an Arthur Crowe tube, and a Barbara Jensen tube on the ones I made with the same background.  One has a couple more elements in it

I am using the scrap kit Midnight Party by Bibi's Collection that you can get at Scraps N Company here.  I am using an exclusive tube from PFD that you can get here.  I started with my 700 x 700 image in Paint Shop Pro X 2 Ultimate.  I used paper 2 out of the papers, and I used masks Nik- static and MythMask 65.  I am thinking the masks came from Creative Misfits Creations here.  With the MythMask, I took three different colors from the kit and put them each in a raster layer with flood fill, and I used that mask.  Each one was moved the way I wanted to show as much of each color.  Element 36 is, actually, the very back layer placed how I wanted to see it.  I know I moved it around to make it a lot bigger.  Remember to gradient glow and drop shadow wherever you want it to look darker and/or stand out.  Element 60 is the next layer, and it is made to be covering the whole layer.  The next layer is the paper with the mask of Nik - Static made how you want it to look.  Element 16 is in front of it, and I put one where I wanted, duplicated it, mirrored it, and I merged the layers down together.  Element 20 is in front of that, and I placed them how I wanted with a duplicate, mirror, flip, and merge of the layers down.  This way the yellow balls are where I wanted them.  Element 64 is in front of that.  I have it facing downward, so you can see the waves coming from the rose more.  Plus, I did put some motion trail and a form of bevel on it..  In front of it, there is the merged layers of colors with the mask of MythMask 65.  Element 79 is in front of that with a placement how you want and added duplicates, flips, and mirrors if wanted.  Element 37 of yellow stars is in front of that the way you want it.  Element 17 is in front of the placed however you want it.  Element 39 of pink bubbles is in front of that.  I put it where I wanted and mirrored it, so they are on both sides and merged together.  Element 27 is in front of it, and I duplicated to put two flipped, merged, and back to back to be seen how I wanted.  Element 29 is in front of that placed on the bottom half of the pic the way I wanted to see it.  It is turned 90 degrees, too.  Element 57 is in front of that, and I duplicated and mirrored, so they could be on each side.  Element 69 is in front of that, and I put it so it covered the sides and the top to be seen.  Element 46 is in front of that, and I duplicated it to have two beside each other to see the stars hanging down.  Element 82 is in front of that, and I made the hue and saturation different to match the colors.  It is placed on the top to show lights across the top.  Element 25 is in front if it, so it can be seen in the fireworks and not cover the lights.  In front of the blue fireworks, I put element 93 of the bigger fireworks.  I duplicated them, mirrored, flipped, and I placed the flipped side how I wanted it next to the regular fireworks, so I could merge the layers together.  Element 33 of the star balloons is in front of that placed where and how I wanted, so I could duplicate and mirror for one on each side.  I placed elements 70 and 71 each in front of a balloon where I wanted, so I could duplicate and mirror.  This way, each is in front of a balloon to show both colors of fireworks.  Lastly, I placed element 51 in the bottom right hand corner for some more celebration look.  The tube is on with my watermark, the copyright for the artist, the statement of Baby, I'm a Firework, and the name of the person who will be owning it.  You can see three more ways to do it below with Ellie and Alex from PFD.  Show me anything you make at my email and/or ask any questions.  I enjoy any feedback and any followers!  Hugz~~  Karee

This is my creation.  I used the awesome art of Barbara Jensen you can get here.  Plus, I used a wonderful scrap kit by Disturbed Scraps at PicsForDesign that you can get here called Sci-fi Girl.  I started with a 700 x 700 new Image.  The papers I used from the front are 4, 12, and 10.  The masks I used were MisfitsChoiceMask 4, MythMask 22, and MythMask 66.  These can be found at Creative Misfits Creations here.  Ok, Element 1 is in front of the last paper 10.  Fit it to the page, and you gradient glow and/or drop shadow where you want in this process.  Element 63 is placed in front of that where you want to be able to see it.  In front of that, element 85 is placed where I wanted, duplicated, and flipped to see it on top and bottom.  I did do some hue and saturation to make the tube and parts of the kit to look different colors.  The second paper is in front of that, so you have element 110 in front of it with it placed where you want on the side, duplicated, and mirrored to the other side.  Element 98 is in front of that placed where you want to show it, duplicated, and flipped to have on top and bottom.  Element 95 is in front of that placed where you want, duplicated, mirrored, and flipped to have them show.  The last paper is in front of that.  Element 43 is in front of that where you want it to show, and element 145 is placed in the upper portion of the tag between the barb wires, duplicate the layer, and flip, so they are on the bottom and top.  This is where you create the cloud looking effect in the middle.  Element 73 is placed where you want to see the parts you want with element 139 in there for some color.  Element 87 is on top of that how you want it.  Element 137 is put to where you can see parts of it, and element 105 is on top of that.  Element 104 is on top of that placed in the corner of your choice, duplicated, mirrored, and flipped to have it on either side.  From there, element 99 is placed in the other corner, duplicated, mirrored, and flipped to have it so it is on either side.  I always merge those layers down.  Element 10 I used Eye Candy 5 Nature Smoke on it.  You can decide how much smoke you want on it.  Element 20 I beveled with Eye Candy 5 Impact and put in the corner.  You can put a copyright, watermark, and whatever statement with a name on it!  Make sure you see the ones below.  A couple have different elements.  I used Anna Liwanag, Alex Prihodko, and Elias!  Hope you enjoy the tutorial, and you can always show me what you did.  Hugz~~

For this tag, I used the awesome work of Bibi's Collection you can get here at ScrapNCompany.  The kit is called Sexy Craziness.  Plus, you can get the tube by Di Halim Goth Angel there, too.  I started with the 700 x 700, as usual.  I used papers 5, 6, and 7 with masks MC_Mask_11, MCbyTonya Mask2_vi, and MCbyTonya Mask4_vi from Creative Misfits Creations here.  Element 12 is between the last paper 6 and the next one 7.  You place it where you want it, duplicate three times, mirror, and flip, so you have four of them covering the areas you want.  In front of those are papers 7 and 5 with masks, so the next element is 11 fit to show as much as you want.  Gradient glow and drop shadow where you want in this whole process.  Element 25 is placed in front of that so it fits on the page with the spikes.  Element 64 is in front of that where you want it to be seen.  Then, element 3 of glass is placed where it looks like it comes from element 25.  Element 9 is in front of that, so you have the spider web placed how you want.  Element 18 of sparkles are in front of those, and I duplicated it with a mirror to have them on both sides.  Element 20 of stars is in front of that placed where you want them.  I did a duplicate and flip to have them in two places.  Element 51 is in front of that.  I placed them in the upper left had corner, mirrored, and flipped to have them in both corners.  Element 29 is placed on and free rotated 90 degrees, so it is facing the opposite way.  It was duplicated and flipped to have on top and bottom.  Element 45 is sized and duplicated, so you can place one in front of element 29 and one behind it.  This way you can erase what you need to make it look as if it is hanging on the wire.  Element 22 is placed on the side how you like, and I duplicated and mirrored to have it on both sides.  From there, I put my copyright, my watermark, whatever statement I want to make, and a name on it.  Make sure to save as you go, and you can share anything you make with me at my email.
Below are three other tags I made with this background because I liked it so much!  I used Di Halim from PFD, an exclusive from PFD, and Anna Liwanag from CDO in these tags.  Enjoy!

With this tag, I am using the art of misticheskaya from Pics for Design.  You can purchase her here.  The scrap kit I used is from Alikas Scraps.  It is in the PTU now FTU area here.  She makes wonderful scrap kits, so it is worth looking into.

Open your new image 700x700, for me.  I used papers 5, 7, and 10 for the background, and two different masks.  Before I start, remember to gradient glow and drop shadow when and where you want.  Element 60 was copy and pasted.  Free rotate it 90 degrees, so you can put it on the side.  Duplicate and mirror, so it is on both sides.  Element 65 was copied and pasted behind it, so that it fit between the openings on element 60.  When it was where I wanted it, I duplicated, and mirrored.  I repeated with a flip and mirror of that to get four of them.  Element 38 was copy and pasted.  Free rotate it 90 degrees, so you can put it across the top.  Duplicate the layer and flip.  Element 28 copy and paste, so you can place where you want it.  From there, mirror and flip.  Element 17 was placed on there where you want, and I flipped it to have the thicker side on top.  Take the magic wand and paste element 56 in there.  Promote and delete, so the mirror ball is in the background.  Take the magic wand to element 17, again, past the tube, move to where you want, promote, and delete.  Make sure the promoted layers are behind the frame.  I duplicated the layer.  On the back layer, I changed the properties to Luminance (L), and front was put on screen.  Element 35 was copied and pasted on there to fit half, so you can duplicate and flip the layer to have it all over.  Element 26 was copied and pasted in behind that.  It was placed in the corner where I wanted and duplicated with a mirror and flip to make it go in both corners.  Element 15 was put in the corner and done the same as Element 26, except I used the hue and saturation of 8 and 0 to make it the gray color.  Element 34 was copied and pasted on there to see it on the bottom.  Then, I put a mirror and flip on it to have it go the other way on the top.  Element 53 is the last in front of the background.  I moved it around to see as much as I could of it with all of the stuff in front of it.  From there, you put the copyright, your watermark, whatever you want to say, and a name on it.  I would love to see what anyone does with this, so you can email them to me at mizzundaztood1@gmail.com.  Plus, that is for questions, too.  Thanks for viewing, and I hope you become a follower!  Hugz, Karee

Below, I just differed in elements and put more promoted layers with frame I chose. Plus, I am using her art from Scraps and the City that can be purchased here.  Any questions about it can be sent to the same address above.

Here is another tut from me.  I used the art work of Di Halim from pics for design.  That you can purchase here.  The scrap kit I used is called Hot Jinx by Bibi's Collection.  It can be purchased at Scraps and the City here.  Filters used are Eye Candy 3.1 and Eye Candy 4.  Remember to gradient glow and drop shadow, whenever you desire.
To start, I opened my 700 x 700 image.  I used papers 3, 13, and 14 for the background with two different masks.  Between the front two mask layers, I copy and pasted element 41, and I sized it to fit in the corner to be seen.  Duplicated the layer and mirrored it.  In front of that, I pasted element 65 and sized to fit.  Element 81 was put in front of that to where I wanted, then duplicated, and flipped it, so it could be seen the way I wanted.  Now, the rest is in front of the mask layers.  Element 73 was put on to look like it was an effect coming from the moon.  Element 53 was copy and pasted on where I wanted, duplicated, and flipped to have it on the top and bottom.  Element 51 was put on to look like it was coming up from the bottom cloud effect.  Element 11 was copy and pasted on, duplicated to the number you want, and spread to different areas to have them appear around the tag.  When I duplicate an element, I, usually, merge the layer down when the fit is right, so I can move it how I want and put effects all at once.  Element 19 was put on and sized to fit.  I duplicated it.  The back one was inner beveled with eye candy 3.1, and the front one I used bevel with eye candy 4 and inner bevel with 3.1.  I changed the  properties on the front and back, so they would appear the way they are.  Element 33 was copy and pasted and sized to fit the bottom of the tag.  Element 76, 56, 43, and 13 were used to copy and paste wherever you want to show them.  (You may notice that element 56 has the word a lot spelled wrong.)  Element 37 and 77 were placed to show a moon with a cloud cover effect.  From here, you put your watermark, copyright, and whatever wording you want on the tag.  Below, I used the Jinx tubes that can be bought at Scraps and the City, too, and the scrap kit was made to go with them. Please ask questions or show off tags made from my tuts! I would like to have a slide show to show off others, someday. Hugz and thanks for stopping by, Karee